Separation control in low pressure turbines using plasma actuators with passing wakes
2013-09
Loading...
View/Download File
Persistent link to this item
Statistics
View StatisticsJournal Title
Journal ISSN
Volume Title
Title
Separation control in low pressure turbines using plasma actuators with passing wakes
Authors
Published Date
2013-09
Publisher
Type
Thesis or Dissertation
Abstract
A Dielectric Barrier Discharge (DBD) plasma actuator is operated in flow over the suction surface of a Pack-B Low Pressure Turbine (LPT) airfoil at a Reynolds number of 50,000 (based on exit velocity and suction surface length) and inlet free-stream turbulence intensity of 2.5%.
Preliminary characterization studies were made of the effect of varying actuator pulsing frequency and duty cycle, actuator edge effects, and orientation of the actuator with the flow. Flow control was demonstrated with the actuator imparting momentum opposite to the stream-wise flow direction, showing that it is possible to use disturbances alone to destabilize the flow and effect transition. No frequencies of strong influence were found over the range tested, indicating that a broad band of effective frequencies exists. Edge effects were found to considerably enhance separation control.
Total pressure measurements of the flow without passing wakes were taken using a glass total-pressure tube. Corrections for streamline displacement due to shear and wall effects were made, and comparisons with previous hot-wire measurements were used to validate data. Performance features of conventional two-electrode and a novel three-electrode actuator configuration were compared.
Hot-wire anemometry was used to take time-varying ensemble-averaged near-wall velocity measurements of the flow with periodic passing wakes. Corrections were made for near-wall effects, temperature effects, and interference of the electric field. The wakes were generated by a wake generator mechanism located upstream of the airfoil passage.
The near-suction-surface total pressure field (flow without wakes) and velocity field (flow with wakes) in the trailing part of the airfoil passage, and the wall-normal gradient of these quantities, were used to demonstrate effective prevention of flow separation using the plasma actuator. Both flows (with and without passing wakes) showed fully attached flow (or very thin separation zones) when the actuator was activated. The flow with passing wakes and the actuator on showed relatively little time variation in the boundary layer, and qualitative similarities to the corresponding flow without passing wakes and with the actuator on were noted.
Description
University of Minnesota Ph.D. dissertation. September 2013. Major: Mechanical Engineering. Advisor: Terrence W. Simon. 1 computer file (PDF); vii, 170 pages, appendix 165-170.
Related to
Replaces
License
Collections
Series/Report Number
Funding information
Isbn identifier
Doi identifier
Previously Published Citation
Suggested citation
Burman, Debashish. (2013). Separation control in low pressure turbines using plasma actuators with passing wakes. Retrieved from the University Digital Conservancy, https://hdl.handle.net/11299/159627.
Content distributed via the University Digital Conservancy may be subject to additional license and use restrictions applied by the depositor. By using these files, users agree to the Terms of Use. Materials in the UDC may contain content that is disturbing and/or harmful. For more information, please see our statement on harmful content in digital repositories.