Between Dec 19, 2024 and Jan 2, 2025, datasets can be submitted to DRUM but will not be processed until after the break. Staff will not be available to answer email during this period, and will not be able to provide DOIs until after Jan 2. If you are in need of a DOI during this period, consider Dryad or OpenICPSR. Submission responses to the UDC may also be delayed during this time.

Browsing by Subject "Phased-array"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    CMOS circuits for multi-antenna communication systems.
    (2010-09) Patnaik, Satwik
    Multi-antenna systems allow for higher communication rates without substantial increase in hardware and power. This has led to significant interest in incorporating multi-antenna communication into upcoming wireless standards, like the 802.11n. This thesis focuses on CMOS circuits and architectures for multi-antenna wireless communication systems. Specifically, we will propose solutions for a special class of multi-antenna systems called phased-array systems. The most important circuit block in a phased-array system is the phase-shifter. Traditional phased-array systems, mostly military radars, used external ferrite phase-shifters for microwave applications, which were wide-band, almost noiseless, highly linear and had high power-handling capability, but were bulky. Commercial wireless systems rely on portability and low-power, with the result that CMOS is the technology of choice and most products are fully integrated on a single-chip. On-chip CMOS phase-shifters have not been able to match the performance of ferrite phase-shifters. Consequently, CMOS-based phased-array systems have relied on a modified architecture known as the LO-phase shifting architecture to deliver comparable performance. In this work, we first present two novel schemes for the phase-generation network for the LO-phase-shifting architecture, based on a phenomenon called injection-locking. The injection-locked oscillator (ILO) is used as a phase-shifter. The two schemes are integrated into a dual-mode architecture for a phased-array receiver providing us with the advantages of both. The prototype, operating at 2.4-GHz, is fabricated in a 0.13-μm CMOS technology. It requires lower power and area compared to previous state-of-the-art designs. Measurement results from this prototype show excellent agreement with the theoretical performance predicted for the phased-array receiver. Both architectures have also been extended to two-dimensional phased-array systems. A majority of the commercial phased-array applications are focused on the mm-wave regime. We have verified that our architecture can operate at these frequencies as well. A 24-GHz two-channel CMOS phased-array receiver has been designed and fabricated in 0.13-μm BiCMOS technology. In this architecture, the injection-locked oscillator not only acts as a phase-shifter and buffer, but also as a frequency tripler. Because of this multi-functionality of the ILO, the overall area and power of this receiver are better than other state-of-the-art designs. Since the LO distribution network now operates at one-third the LO frequency, it allows for further power savings in the distribution network. Finally, a beam-forming receiver based on the Fast-Fourier Transform (FFT) is presented. In this architecture, the beam-forming operations are performed in the baseband processing section. Owing to a low-power FFT architecture and the inherent properties of the FFT, multiple beams can be created at closely-spaced frequencies. This allows the use of narrow-band transmitter and receiver architectures for the RF section. A two-channel receiver based on this architecture has been designed in a 65-nm CMOS process. In addition, to these different receiver architectures, a novel 24-GHz UWB-LNA is presented. The LNA, which has been integrated as part of a UWB receiver, is presented in this thesis. However, the overall UWB receiver design is not presented here.