Between Dec 19, 2024 and Jan 2, 2025, datasets can be submitted to DRUM but will not be processed until after the break. Staff will not be available to answer email during this period, and will not be able to provide DOIs until after Jan 2. If you are in need of a DOI during this period, consider Dryad or OpenICPSR. Submission responses to the UDC may also be delayed during this time.

Browsing by Subject "Frequency analysis"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Numerical Assessment of Three-Dimensional Rigid Pavement Joints Under Impact Loads
    (1990-08) Koubaa, Amir; Krauthammer, Theodor
    This study was conducted with the aim of improving the state of knowledge on the behavior of joints in concrete pavements, and to explore the feasibility of developing a non-destructive testing technique based on frequency response of dynamically loaded joints. One of the objectives of this study was to numerically investigate the existence of a relationship between load transfer capacity of a joint in rigid pavements and its dynamic response. The approach adapted for the present study is based on a numerical model which accurately represents the mechanism of shear transfer in reinforced concrete members implemented it in a commercially available finite element code. That tool is then used for the analysis of two models which consisted of various joint conditions. One model represented an ideal condition of full load transfer across a joint, while the other model was used to simulate variable load transfer conditions. The results obtained are analyzed in the time and frequency domains. These results provided a comprehensive description of the joint response characteristics, and enabled the derivation of a clear relationship between the response frequencies and the joint's shear transfer capabilities. The results may be used as the starting point for the development of a precise/non-destructive testing method for a wide range of cases in which shear transfer across discontinuities in concrete systems is a principal load resisting mechanism. Specific conclusions and recommendations on future developments have been provided.
  • Thumbnail Image
    Item
    Vibration Spectroscopy for Rigid Pavement Joint Assessment
    (1990-08) Palmieri, Lucio; Krauthammer, Theodor
    This study was conducted with the aim of improving the state of knowledge on the behavior of joints in concrete pavements, and to explore the feasibility of developing a non-destructive testing technique based on the frequency response of dynamically loaded joints. One of the objectives of the present study was to experimentally investigate the existence of a relationship between load transfer capacity of a joint in rigid pavements and its dynamic response. the experimental study involved the application of an impact testing approach for the evaluation of two test systems. One system represented an ideal condition of full load transfer across a joint, while the other system was used to simulate variable load transfer conditions. Acceleration-time histories captured from both sides of the joint, under short load pulses, were used for analysis both in the time and frequency domains. These results provided a comprehensive description of the joint response characteristics, and enabled the derivation of a clear relationship between the response frequencies and the joint's shear transfer capabilities. These results may be used as the starting point for the development of a precise non-destructive testing method for a wide range of cases in which shear transfer across discontinuities in concrete systems is a principal load resisting mechanism. Specific conclusions and recommendations on future developments have been provided.