Between Dec 19, 2024 and Jan 2, 2025, datasets can be submitted to DRUM but will not be processed until after the break. Staff will not be available to answer email during this period, and will not be able to provide DOIs until after Jan 2. If you are in need of a DOI during this period, consider Dryad or OpenICPSR. Submission responses to the UDC may also be delayed during this time.

Browsing by Author "Wei, Tsong C."

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Numerical Routing of Flood Hydrographs through Open Channel Junctions
    (Water Resources Research Center, University of Minnesota, 1971-08) Bowers, C. Edward; Larson, Curtis L.; Wei, Tsong C.
    The study was concerned with numerical routing of flood hydrographs through open channel junctions. An open channel junction with a main channel above and below plus a branch channel were constructed in the laboratory. All channels were rectangular in shape, but varied in size. Facilities and procedures for supplying hvdrographs to the two channels above the junction were developed. Provision was made for measuring both inflow and outflow hydrographs and also flow depths at selected points in the three channels. A total of 14 experiments were conducted with various combinations of input hydrographs in terms of magnitude and relative timing. Unsteady flow conditions (depth, velocity and discharge) in the three channels were calculated at calculated at 5-ft. length increments and 1-sec. time increments, using the method of explicit finite differences applied to the characteristic equations. A procedure for calculating unsteady flow backwater effects in either or both of the upstream channels was developed and utilized as an integral part of the routing method. The junction routing procedure appears to be fairly general, having been applied in a situation where the channels above and below the junction are at different size, slope and elevation. In particular, it was shown that unsteady flow backwater effects can be represented in the method of explicit finite differences applied to the characteristic equations. Some error can be expected in any numerical method, as well as in all measurements. Due to the measurement error cited above, the amount of error attributable to the routing method cannot be determined. It appears to be on the order of 6 percent, but could be less than this amount.