Browsing by Author "Qiu, Kaiyan"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Supporting data for "3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors"(2020-05-22) Qiu, Kaiyan; Zhao, Zichen; Haghiashtiani, Ghazaleh; Guo, Shuang-Zhuang; He, Mingyu; Su, Ruitao; Zhu, Zhijie; Bhuiyan, Didarul B; Murugan, Paari; Meng, Fanben; Park, Sung Hyun; Chu, Chih-Chang; Ogle, Brenda M; Saltzman, Daniel A; Konety, Badrinath R; Sweet, Robert M; McAlpine, Michael C; mcalpine@umn.edu; McAlpine, Michael C; McAlpine Research GroupThe data set includes the experimental data and the corresponding MRI stereolithography (STL) file supporting the results reported in Kaiyan Qiu; Zichen Zhao; Ghazaleh Haghiashtiani; Shuang-Zhuang Guo; Mingyu He; Ruitao Su; Zhijie Zhu; Didarul B. Bhuiyan; Paari Murugan; Fanben Meng; Sung Hyun Park; Chih-Chang Chu; Brenda M. Ogle; Daniel A. Saltzman; Badrinath R. Konety; Robert M. Sweet; Michael C. McAlpine. 3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors. Adv. Mater. Technol. 2018, 3, 1700235. The design and development of novel methodologies and customized materials to fabricate patient-specific 3D printed organ models with integrated sensing capabilities could yield advances in smart surgical aids for preoperative planning and rehearsal. Here, we demonstrate 3D printed prostate models with physical properties of tissue and integrated soft electronic sensors using custom-formulated polymeric inks. The models show high quantitative fidelity in static and dynamic mechanical properties, optical characteristics, and anatomical geometries to patient tissues and organs. The models offer tissue-like tactile sensation and behavior and thus can be used for the prediction of organ physical behavior under deformation. The prediction results show good agreement with values obtained from simulations. The models also allow the application of surgical and diagnostic tools to their surface and inner channels. Finally, via the conformal integration of 3D printed soft electronic sensors, pressure applied to the models with surgical tools can be quantitatively measured.Item Supporting data for "3D printed patient-specific aortic root models with internal sensors for minimally invasive applications"(2020-06-09) Haghiashtiani, Ghazaleh; Qiu, Kaiyan; Sanchez, Jorge D Zhingre; Fuenning, Zachary J; Nair, Priya; Ahlberg, Sarah E; Iaizzo, Paul A; McAlpine, Michael C; mcalpine@umn.edu; McAlpine, Michael C; McAlpine Research GroupMinimally invasive surgeries have numerous advantages, yet complications may arise from limited knowledge about the anatomical site targeted for the delivery of therapy. Transcatheter aortic valve replacement (TAVR) is a minimally invasive procedure for treating aortic stenosis. Here, we demonstrate multi-material 3D printing of patient-specific soft aortic root models with internally-integrated electronic sensor arrays that can augment testing for TAVR preprocedural planning. We evaluated the efficacies of the models by comparing their geometric fidelities with postoperative data from patients, as well as their in vitro hemodynamic performances in cases with and without leaflet calcifications. Furthermore, we uniquely demonstrated that internal sensor arrays can facilitate the optimization of bioprosthetic valve selections and in vitro placements via mapping of the pressures applied on the critical regions of the aortic anatomies. Such models may pave new avenues for mitigating the risks of postoperative complications, as well as facilitating the development of next-generation medical devices.Item Supporting data for "3D Printed Polymer Photodetectors"(2020-05-29) Park, Sung Hyun; Su, Ruitao; Guo, Shuang-Zhuang; Qiu, Kaiyan; Joung, Daeha; Fanben, Meng; McAlpine, Michael C; Jeong, Jaewoo; mcalpine@umn.edu; McAlpine, Michael C; McAlpine Research GroupExtrusion-based 3D printing, an emerging technology, has been previously used in the comprehensive fabrication of light-emitting diodes using various functional inks, without cleanrooms or conventional microfabrication techniques. Here, polymer-based photodetectors exhibiting high performance are fully 3D printed and thoroughly characterized. A semiconducting polymer ink is printed and optimized for the active layer of the photodetector, achieving an external quantum efficiency of 25.3%, which is comparable to that of microfabricated counterparts and yet created solely via a one-pot custom built 3D-printing tool housed under ambient conditions. The devices are integrated into image sensing arrays with high sensitivity and wide field of view, by 3D printing interconnected photodetectors directly on flexible substrates and hemispherical surfaces. This approach is further extended to create integrated multifunctional devices consisting of optically coupled photodetectors and light-emitting diodes, demonstrating for the first time the multifunctional integration of multiple semiconducting device types which are fully 3D printed on a single platform. The 3D-printed optoelectronic devices are made without conventional microfabrication facilities, allowing for flexibility in the design and manufacturing of next-generation wearable and 3D-structured optoelectronics, and validating the potential of 3D printing to achieve high-performance integrated active electronic materials and devices.