Maheshwari, Sudeep2009-12-092009-12-092009-08https://hdl.handle.net/11299/55574University of Minnesota Ph.D. dissertation. August 2009. Major: Chemical Engineering. Advisors: Frank S. Bates and Michael Tsapatsis. 1 computer file (PDF); xi, 114 pages.Mixed matrix materials, comprising of zeolites incorporated in suitable matrix (polymeric or inorganic), are promising as future membrane materials with high permselectivity. However, they suffer from the drawback of low productivity due to increase in the membrane thickness by incorporation of micron-sized zeolites crystals as well as the low-permeability matrices employed currently. Nanocomposite membranes, consisting of thin zeolite sheets (~2 nm) embedded in an appropriate matrix, can provide a solution to this problem. This thesis addresses some of the material challenges to make such nanocomposite membranes. A high permeability polymer was synthesized by combining the glassy polystyrene (PS) with the rubbery polydimethylsiloxane (PDMS) in a block copolymer architecture. The mechanical toughness of the material was optimized to facilitate the fabrication of thin free standing films and its gas transport properties were evaluated. The PS-PDMS-PS triblock copolymers were successfully hydrogenated for the first time to obtain the PCHE-PDMS-PCHE triblock copolymers (PCHE stands for polycyclohexylethylene). The hydrogenation reaction proceeded without any polymer chain breaking and the resultant polymer showed some interesting, rather unexpected thermodynamic properties. These polymeric materials are potentially useful as the matrix of nanocomposite membranes. Highly crystalline zeolite sheets were obtained by exfoliation of zeolite lamellae. Preservation of crystal morphology and pore structure, which presents a major challenge during the exfoliation process, was successfully addressed in this work by judicious choice of operating conditions. Lamellae were exfoliated by surfactant intercalation and subsequently melt processing with polymers, resulting in polymer nanocomposites containing thin zeolite sheets (~2.5 nm) with well preserved pore structure. A method to obtain polymer-free exfoliated sheets was also developed to facilitate the fabrication of inorganic composite membranes. These zeolite sheets can be used as the selectivity-enhancement additive in composite membranes.en-USBlock CopolymerExfoliationLayered Zeolitemcm-22MembraneChemical EngineeringThesis or Dissertation