In this study, the accuracy of the stiffness estimate from portable deflectometer devices is investigated, based upon the example of a particular device, the Portable Falling Weight Deflectometer PRIMA 100. A laboratory calibration setup, assembly comporting a simply supported steel beam of variable span, is designed to verify the calibration of the device (sensors and data interpretation method). Associated with the tester apparatus, an enhanced setup for the portable device is examined. From verification of the stiffness estimated from the portable device against the known stiffness of the beam the inconsistency of the data interpretation method using peak values of load and displacement time histories is pointed out. An alternative method using Frequency Response Functions, spectral average, Single Degree of Freedom System analog, zero frequency estimates and curve fitting is proposed to extract the static stiffness from PRIMA measurements. Test results show the good agreement between estimates stemming from the modified analysis and true beam stiffness. Baseline for the application of both the alternative method and the enhanced device setup to quality control field measurements is proposed.
Hoffmann, Olivier; Guzina, Bojan; Drescher, Andrew.
Enhancements and Verification Tests for Portable Deflectometers.
Retrieved from the University of Minnesota Digital Conservancy,
Content distributed via the University of Minnesota's Digital Conservancy may be subject to additional license and use restrictions applied by the depositor.