This readme.txt file was generated on 20221219 by Rashmi Choudhary. Recommended citation for the data: Choudhary, Rashmi; Nair, Sreejith; Yang, Zhifei; Lee, Dooyong; Jalan, Bharat. (2022). Supporting data for "Semi-metallic SrIrO3 films using solid-source metal-organic molecular beam epitaxy". Retrieved from the Data Repository for the University of Minnesota, https://doi.org/10.13020/ayyy-3q95. ------------------- GENERAL INFORMATION ------------------- 1. Title of Dataset: Supporting data for "Semi-metallic SrIrO3 films using solid-source metal-organic molecular beam epitaxy" 2. Author Information Principal Investigator Contact Information Name: Bharat Jalan Institution: University of Minnesota, Twin-cities, USA Address: 421 Washington Ave SE, Minneapolis, MN 55455 Email: bjalan@umn.edu ORCID: 0000-0002-7940-0490 Associate or Co-investigator Contact Information Name: Rashmi Choudhary Institution: University of Minnesota, Twin-cities, USA Address: 421 Washington Ave SE, Minneapolis, MN 55455 Email: choud140@umn.edu ORCID: 0000-0002-3558-1277 Associate or Co-investigator Contact Information Name: Sreejith Nair Institution: University of Minnesota, Twin-cities, USA Address: 421 Washington Ave SE, Minneapolis, MN 55455 Email: nair0074@umn.edu ORCID: 0000-0002-4457-2698 Associate or Co-investigator Contact Information Name: Zhifei Yang Institution: University of Minnesota, Twin-cities, USA Address: 421 Washington Ave SE, Minneapolis, MN 55455 Email: yang7001@umn.edu ORCID: Associate or Co-investigator Contact Information Name: Dooyong Lee Institution: University of Minnesota, Twin-cities, USA Address: 421 Washington Ave SE, Minneapolis, MN 55455 Email: dylee@umn.edu ORCID: 0000-0001-7536-1677 3. Date published or finalized for release: 30 September 2022 4. Date of data collection (single date, range, approximate date): 20220330 - 20220830 5. Geographic location of data collection (where was data collected?): University of Minnesota, Twin-cities 6. Information about funding sources that supported the collection of the data: Air Force Office of Scientific Research (AFOSR) Grant Nos. FA9550-21-1-0025 and FA9550-21-0460, NSF through the MRSEC program under Award No. DMR-2011401 partial support from the U.S. Department of Energy (DOE) through Grant No. DE-SC0020211 Parts of this work were carried out at the Characterization Facility, University of Minnesota, which receives partial support from the NSF through the MRSEC program under Award No. DMR-2011401 Some work carried out at the Minnesota Nano Center, which is supported by the NSF through the National Nanotechnology Coordinated Infrastructure under Award No. ECCS-2025124 7. Overview of the data (abstract): The data contains X-ray and electrical characterization of SrIrO3 films grown by solid-source metal-organic molecular beam epitaxy (SSMOMBE). It reveals that SSMOMBE can produce high-quality crystals and has numerous other advantages compared to conventional molecular beam epitaxy. -------------------------- SHARING/ACCESS INFORMATION -------------------------- 1. Licenses/restrictions placed on the data: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) 2. Links to publications that cite or use the data: Rashmi Choudhary, Sreejith Nair, Zhifei Yang, Dooyong Lee, and Bharat Jalan , "Semi-metallic SrIrO3 films using solid-source metal-organic molecular beam epitaxy", APL Materials 10, 091118 (2022) https://doi.org/10.1063/5.0110707 3. Was data derived from another source?: No If yes, list source(s): 4. Terms of Use: Data Repository for the U of Minnesota (DRUM) By using these files, users agree to the Terms of Use. https://conservancy.umn.edu/pages/drum/policies/#terms-of-use --------------------- DATA & FILE OVERVIEW --------------------- 1. File List A. Filename: 113SIO_008_WideCoupledScan.txt Short description: Contains high-resolution X-ray diffraction scans used for plotting figure 2(a) and 2(b) of the paper. B. Filename: 113SIO_008_XRR.txt Short description: Contains X-ray reflectivity data used for plotting figure 2(c) of the paper. C. Filename: 113SIO_008_RSM_1.txt and 113SIO_008_RSM_2.txt Short description: Both files combined contain reciprocal space map data shown in figure 2(d) of the paper. The second file is continuation of the first one. D. Filename: 113SIO_008_R vs T_warming.csv Short description: Contains temperature dependent resistance data used for plotting figure 3(a) and 3(b) of the paper. E. Filename: 113SIO_008_MR and Hall_9T_1.8 K_ch1_cooling.csv Short description: Contains magnetoresistance and Hall data at 1.8 K used for plotting figure 3(c) and 3(d) of the paper. F. Filename: 113SIO_008_MR and Hall_9T_10 K_ch1_cooling.csv Short description: Contains magnetoresistance and Hall data at 10 K used for plotting figure 3(c) and 3(d) of the paper. G. Filename: 113SIO_008_MR and Hall_9T_50 K_ch1_cooling.csv Short description: Contains magnetoresistance and Hall data at 50 K used for plotting figure 3(c) and 3(d) of the paper. H. Filename: 113SIO_008_MR and Hall_9T_100 K_ch1_cooling.csv Short description: Contains magnetoresistance and Hall data at 100 K used for plotting figure 3(c) and 3(d) of the paper. I. Filename: 113SIO_008_MR and Hall_9T_150 K_ch1_cooling.csv Short description: Contains magnetoresistance and Hall data at 150 K used for plotting figure 3(c) and 3(d) of the paper. J. Filename: 113SIO_008_MR and Hall_9T_300 K_ch1_cooling.csv Short description: Contains magnetoresistance and Hall data at 300 K used for plotting figure 3(c) and 3(d) of the paper. -------------------------- METHODOLOGICAL INFORMATION -------------------------- 1. Description of methods used for collection/generation of data: The high-resolution x-ray diffraction data, the x-ray reflectivity data, and the reciprocal space map data were obtained using Rigaku Smartlab XE (Rigaku Corporation, Japan) using Cu Kα radiation at 45 kV and 40 mA. Physical property measurement system Dynacool was used to measure the temperature dependent resistivity, magnetoresistance, and Hall resistance. 2. People involved with sample collection, processing, analysis and/or submission: Rashmi Choudhary, Sreejith Nair, Zhifei yang, Dooyong Lee, Bharat Jalan ----------------------------------------- DATA-SPECIFIC INFORMATION FOR: 113SIO_008_WideCoupledScan.txt ----------------------------------------- 1. Number of variables: 2 2. Number of cases/rows: 17503 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: 2θ (˚) Description: The first column of the data file is 2θ. It is the angle at which the X-ray detecter records intensity. The unit is degrees. B. Name: Intensity (cps) Description: The second column of the data file is intensity detected by the X-ray detector. The unit is counts per second (cps). DATA-SPECIFIC INFORMATION FOR: 113SIO_008_XRR.txt ----------------------------------------- 1. Number of variables: 2 2. Number of cases/rows: 1003 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: 2θ (˚) Description: The first column of the data file is 2θ. It is the angle at which the X-ray detecter records intensity. The unit is degrees. B. Name: Intensity (cps) Description: The second column of the data file is intensity detected by the X-ray detector. The unit is counts per second (cps). DATA-SPECIFIC INFORMATION FOR: 113SIO_008_RSM_1.txt ----------------------------------------- 1. Number of variables: 3 2. Number of cases/rows: 173184 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: ω (˚) Description: The first column of the data file is ω. It is the angle of incidence of X-rays on the sample. The unit is degrees. B. Name: 2θ (˚) Description: The second column of the data file is 2θ. It is the angle at which the X-ray detecter records intensity. The unit is degrees. B. Name: Intensity (counts) Description: The third column of the data file is intensity detected by the X-ray detector. The unit is counts. DATA-SPECIFIC INFORMATION FOR: 113SIO_008_RSM_2.txt ----------------------------------------- 1. Number of variables: 3 2. Number of cases/rows: 171862 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: ω (˚) Description: The first column of the data file is ω. It is the angle of incidence of X-rays on the sample. The unit is degrees. B. Name: 2θ (˚) Description: The second column of the data file is 2θ. It is the angle at which the X-ray detecter records intensity. The unit is degrees. C. Name: Intensity (counts) Description: The third column of the data file is intensity detected by the X-ray detector. The unit is counts. DATA-SPECIFIC INFORMATION FOR: 113SIO_008_R vs T_warming.csv ----------------------------------------- 1. Number of variables: 7 2. Number of cases/rows: 369 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: Time stamp (sec) Description: The first column of the data file is time stamp. It is the the time at which the data point was recorded. The unit is seconds. B. Name: Temperature (K) Description: The second column of the data file is temperature at which the data point was recorded. The unit is Kelvin. C. Name: Magnetic field (Oe) Description: The third column of the data file is the magnetic field at which the data point was recorded. The unit is Oersted. D. Name: Bridge 1 excitation (µA) Description: The fourth column of the data file is the current applied to bridge 1 (Ixx) of the Van Der Pauw geometry. The unit is micro Ampere. E. Name: Bridge 2 excitation (µA) Description: The fifth column of the data file is the current applied to bridge 2 (Iyy) of the Van Der Pauw geometry. The unit is micro Ampere. F. Name: Bridge 1 resistance (Ohms) Description: The sixth column of the data file is the measured bridge 1 resistance (Rxx) of the Van Der Pauw geometry. The unit is Ohm. G. Name: Bridge 2 resistance (Ohms) Description: The seventh column of the data file is the measured bridge 2 resistance (Ryy) of the Van Der Pauw geometry. The unit is Ohm. DATA-SPECIFIC INFORMATION FOR: 113SIO_008_MR and Hall_9T_1.8 K_ch1_cooling.csv ----------------------------------------- 1. Number of variables: 9 2. Number of cases/rows: 184 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: Time stamp (sec) Description: The first column of the data file is time stamp. It is the the time at which the data point was recorded. The unit is seconds. B. Name: Temperature (K) Description: The second column of the data file is temperature at which the data point was recorded. The unit is Kelvin. C. Name: Magnetic field (Oe) Description: The third column of the data file is the magnetic field at which the data point was recorded. The unit is Oersted. D. Name: Bridge 1 excitation (µA) Description: The fourth column of the data file is the current applied to bridge 1 (Ixx) of the Van Der Pauw geometry. The unit is micro Ampere. E. Name: Bridge 2 excitation (µA) Description: The fifth column of the data file is the current applied to bridge 2 (Iyy) of the Van Der Pauw geometry. The unit is micro Ampere. F. Name: Bridge 3 excitation (µA) Description: The sixth column of the data file is the current applied to bridge 3 (Ixy) of the Van Der Pauw geometry. The unit is micro Ampere. G. Name: Bridge 1 resistance (Ohms) Description: The seventh column of the data file is the measured bridge 1 resistance (Rxx) of the Van Der Pauw geometry. The unit is Ohm. H. Name: Bridge 2 resistance (Ohms) Description: The eighth column of the data file is the measured bridge 2 resistance (Ryy) of the Van Der Pauw geometry. The unit is Ohm. I. Name: Bridge 3 resistance (Ohms) Description: The ninth column of the data file is the measured bridge 3 resistance (Rxy) of the Van Der Pauw geometry. The unit is Ohm. DATA-SPECIFIC INFORMATION FOR: 113SIO_008_MR and Hall_9T_10 K_ch1_cooling.csv ----------------------------------------- 1. Number of variables: 9 2. Number of cases/rows: 184 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: Time stamp (sec) Description: The first column of the data file is time stamp. It is the the time at which the data point was recorded. The unit is seconds. B. Name: Temperature (K) Description: The second column of the data file is temperature at which the data point was recorded. The unit is Kelvin. C. Name: Magnetic field (Oe) Description: The third column of the data file is the magnetic field at which the data point was recorded. The unit is Oersted. D. Name: Bridge 1 excitation (µA) Description: The fourth column of the data file is the current applied to bridge 1 (Ixx) of the Van Der Pauw geometry. The unit is micro Ampere. E. Name: Bridge 2 excitation (µA) Description: The fifth column of the data file is the current applied to bridge 2 (Iyy) of the Van Der Pauw geometry. The unit is micro Ampere. F. Name: Bridge 3 excitation (µA) Description: The sixth column of the data file is the current applied to bridge 3 (Ixy) of the Van Der Pauw geometry. The unit is micro Ampere. G. Name: Bridge 1 resistance (Ohms) Description: The seventh column of the data file is the measured bridge 1 resistance (Rxx) of the Van Der Pauw geometry. The unit is Ohm. H. Name: Bridge 2 resistance (Ohms) Description: The eighth column of the data file is the measured bridge 2 resistance (Ryy) of the Van Der Pauw geometry. The unit is Ohm. I. Name: Bridge 3 resistance (Ohms) Description: The ninth column of the data file is the measured bridge 3 resistance (Rxy) of the Van Der Pauw geometry. The unit is Ohm. DATA-SPECIFIC INFORMATION FOR: 113SIO_008_MR and Hall_9T_50 K_ch1_cooling.csv ----------------------------------------- 1. Number of variables: 9 2. Number of cases/rows: 184 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: Time stamp (sec) Description: The first column of the data file is time stamp. It is the the time at which the data point was recorded. The unit is seconds. B. Name: Temperature (K) Description: The second column of the data file is temperature at which the data point was recorded. The unit is Kelvin. C. Name: Magnetic field (Oe) Description: The third column of the data file is the magnetic field at which the data point was recorded. The unit is Oersted. D. Name: Bridge 1 excitation (µA) Description: The fourth column of the data file is the current applied to bridge 1 (Ixx) of the Van Der Pauw geometry. The unit is micro Ampere. E. Name: Bridge 2 excitation (µA) Description: The fifth column of the data file is the current applied to bridge 2 (Iyy) of the Van Der Pauw geometry. The unit is micro Ampere. F. Name: Bridge 3 excitation (µA) Description: The sixth column of the data file is the current applied to bridge 3 (Ixy) of the Van Der Pauw geometry. The unit is micro Ampere. G. Name: Bridge 1 resistance (Ohms) Description: The seventh column of the data file is the measured bridge 1 resistance (Rxx) of the Van Der Pauw geometry. The unit is Ohm. H. Name: Bridge 2 resistance (Ohms) Description: The eighth column of the data file is the measured bridge 2 resistance (Ryy) of the Van Der Pauw geometry. The unit is Ohm. I. Name: Bridge 3 resistance (Ohms) Description: The ninth column of the data file is the measured bridge 3 resistance (Rxy) of the Van Der Pauw geometry. The unit is Ohm. DATA-SPECIFIC INFORMATION FOR: 113SIO_008_MR and Hall_9T_100 K_ch1_cooling.csv ----------------------------------------- 1. Number of variables: 9 2. Number of cases/rows: 184 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: Time stamp (sec) Description: The first column of the data file is time stamp. It is the the time at which the data point was recorded. The unit is seconds. B. Name: Temperature (K) Description: The second column of the data file is temperature at which the data point was recorded. The unit is Kelvin. C. Name: Magnetic field (Oe) Description: The third column of the data file is the magnetic field at which the data point was recorded. The unit is Oersted. D. Name: Bridge 1 excitation (µA) Description: The fourth column of the data file is the current applied to bridge 1 (Ixx) of the Van Der Pauw geometry. The unit is micro Ampere. E. Name: Bridge 2 excitation (µA) Description: The fifth column of the data file is the current applied to bridge 2 (Iyy) of the Van Der Pauw geometry. The unit is micro Ampere. F. Name: Bridge 3 excitation (µA) Description: The sixth column of the data file is the current applied to bridge 3 (Ixy) of the Van Der Pauw geometry. The unit is micro Ampere. G. Name: Bridge 1 resistance (Ohms) Description: The seventh column of the data file is the measured bridge 1 resistance (Rxx) of the Van Der Pauw geometry. The unit is Ohm. H. Name: Bridge 2 resistance (Ohms) Description: The eighth column of the data file is the measured bridge 2 resistance (Ryy) of the Van Der Pauw geometry. The unit is Ohm. I. Name: Bridge 3 resistance (Ohms) Description: The ninth column of the data file is the measured bridge 3 resistance (Rxy) of the Van Der Pauw geometry. The unit is Ohm. DATA-SPECIFIC INFORMATION FOR: 113SIO_008_MR and Hall_9T_150 K_ch1_cooling.csv ----------------------------------------- 1. Number of variables: 9 2. Number of cases/rows: 184 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: Time stamp (sec) Description: The first column of the data file is time stamp. It is the the time at which the data point was recorded. The unit is seconds. B. Name: Temperature (K) Description: The second column of the data file is temperature at which the data point was recorded. The unit is Kelvin. C. Name: Magnetic field (Oe) Description: The third column of the data file is the magnetic field at which the data point was recorded. The unit is Oersted. D. Name: Bridge 1 excitation (µA) Description: The fourth column of the data file is the current applied to bridge 1 (Ixx) of the Van Der Pauw geometry. The unit is micro Ampere. E. Name: Bridge 2 excitation (µA) Description: The fifth column of the data file is the current applied to bridge 2 (Iyy) of the Van Der Pauw geometry. The unit is micro Ampere. F. Name: Bridge 3 excitation (µA) Description: The sixth column of the data file is the current applied to bridge 3 (Ixy) of the Van Der Pauw geometry. The unit is micro Ampere. G. Name: Bridge 1 resistance (Ohms) Description: The seventh column of the data file is the measured bridge 1 resistance (Rxx) of the Van Der Pauw geometry. The unit is Ohm. H. Name: Bridge 2 resistance (Ohms) Description: The eighth column of the data file is the measured bridge 2 resistance (Ryy) of the Van Der Pauw geometry. The unit is Ohm. I. Name: Bridge 3 resistance (Ohms) Description: The ninth column of the data file is the measured bridge 3 resistance (Rxy) of the Van Der Pauw geometry. The unit is Ohm. DATA-SPECIFIC INFORMATION FOR: 113SIO_008_MR and Hall_9T_300 K_ch1_cooling.csv ----------------------------------------- 1. Number of variables: 9 2. Number of cases/rows: 184 3. Missing data codes: Code/symbol: cells with blanks are missing data 4. Variable List A. Name: Time stamp (sec) Description: The first column of the data file is time stamp. It is the the time at which the data point was recorded. The unit is seconds. B. Name: Temperature (K) Description: The second column of the data file is temperature at which the data point was recorded. The unit is Kelvin. C. Name: Magnetic field (Oe) Description: The third column of the data file is the magnetic field at which the data point was recorded. The unit is Oersted. D. Name: Bridge 1 excitation (µA) Description: The fourth column of the data file is the current applied to bridge 1 (Ixx) of the Van Der Pauw geometry. The unit is micro Ampere. E. Name: Bridge 2 excitation (µA) Description: The fifth column of the data file is the current applied to bridge 2 (Iyy) of the Van Der Pauw geometry. The unit is micro Ampere. F. Name: Bridge 3 excitation (µA) Description: The sixth column of the data file is the current applied to bridge 3 (Ixy) of the Van Der Pauw geometry. The unit is micro Ampere. G. Name: Bridge 1 resistance (Ohms) Description: The seventh column of the data file is the measured bridge 1 resistance (Rxx) of the Van Der Pauw geometry. The unit is Ohm. H. Name: Bridge 2 resistance (Ohms) Description: The eighth column of the data file is the measured bridge 2 resistance (Ryy) of the Van Der Pauw geometry. The unit is Ohm. I. Name: Bridge 3 resistance (Ohms) Description: The ninth column of the data file is the measured bridge 3 resistance (Rxy) of the Van Der Pauw geometry. The unit is Ohm.