This readme.txt file was generated on 20200427 by Zhijie_Zhu


-------------------
GENERAL INFORMATION
-------------------


1. Title of Dataset 
Supporting data for "3D Printed Deformable Sensors"

2. Author Information


  Principal Investigator Contact Information
           Name: Michael C. McAlpine
           Institution: University of Minnesota
           Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA
           Email: mcalpine@umn.edu 
	   ORCID: 0000-0001-7869-7598

  Associate or Co-investigator Contact Information
           Name: Zhijie Zhu
           Institution: University of Minnesota
           Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA
           Email: zhux0351@umn.edu
	   ORCID: 0000-0002-5889-4874

  Associate or Co-investigator Contact Information
           Name: Hyun Soo Park
           Institution: University of Minnesota
           Address: Department of Computer Science and Engineering, University of Minnesota, Minneapolis, MN 55455, USA
           Email: hspark@umn.edu
	   ORCID: 0000-0001-6613-0738

3. Date of data collection
	Approximate date: 20190401-20200401


4. Geographic location of data collection (where was data collected?): 
	The University of Minnesota

5. Information about funding sources that supported the collection of the data:
	National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health under Award Number DP2EB020537
	Medtronic plc
	The University of Minnesota, 2019–20 Doctoral Dissertation Fellowship
	



--------------------------
SHARING/ACCESS INFORMATION
-------------------------- 


1. Licenses/restrictions placed on the data:
	CC BY-NC 3.0 US
	https://creativecommons.org/licenses/by-nc/3.0/us/

2. Links to publications that cite or use the data:
	Zhu, Z., Park, H. S., McAlpine, M. C. Sci. Adv. 2020. DOI: 10.1126/sciadv.aba5575

3. Links to other publicly accessible locations of the data:
	NA

4. Links/relationships to ancillary data sets:
	NA

5. Was data derived from another source?
	No

6. Recommended citation for the data:
	Zhu, Zhijie; Park, Hyun Soo; McAlpine, Michael C. (2020). Supporting data for "3D Printed Deformable Sensors". Retrieved from the Data Repository for the University of Minnesota, http://hdl.handle.net/11299/212709.



---------------------
DATA & FILE OVERVIEW
---------------------
All the .opj files were generated using OriginPro 9.0.0 (64-bit) b45.  
All the .m, .fig and .mat files were generated using Matlab R2019a academic.
Running the .m files that were related to EIT operation requred installation of EIDORS (licenced under GNU General Public License)  
Running instructions contained within files.


1. File List
   A. Filename: Figure 2 data.rar        
      Short description: Raw data files for Figure 2a-e.         

   B. Filename: Figure 3 data.rar       
      Short description: Raw data files for Figure 3c-f.            
        
   C. Filename: Figure 4 data.rar        
      Short description: Raw data files for Figure 4g-h.

   D. Filename: Figure S1 data.rar        
      Short description: Raw data files for Figure S1c, f, g.

   E. Filename: Figure S2 data.opj        
      Short description: Raw data file for Figure S2a-c.

   F. Filename: Figure S3 data.opj        
      Short description: Raw data file for Figure S3d-h.

   G. Filename: Figure S6 data.rar        
      Short description: Raw data files for Figure S6d.

   H. Filename: Figure S7 data.rar        
      Short description: Raw data files for Figure S7a-e.

   I. Filename: Figure S8 data.opj        
      Short description: Raw data file for Figure S8a.

   J. Filename: Code for adaptive printing.rar        
      Short description: Code files for adaptive printing controller (For AeroTech 3D printer).

   K. Filename: Code for strain sensing.rar          
      Short description: Code files for EIT sensor operation (including the code files for teensy microcontroller and Matlab interface).


2. Are there multiple versions of the dataset? yes/no
	No.