This Readme_Su_3D Printed OLED Displays.txt file was generated on <20211024> by ------------------- GENERAL INFORMATION ------------------- 1. Title of Dataset Supporting Data for "3D Printed Flexible Organic Light-Emitting Diode Displays" 2. Author Information Principal Investigator Contact Information Name: Michael C. McAlpine Institution: University of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: mcalpine@umn.edu ORCID: 0000-0001-7869-7598 Associate or Co-investigator Contact Information Name: Ruitao Su Institution: University of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: suxxx295@umn.edu ORCID: 0000-0002-6716-7046 Associate or Co-investigator Contact Information Name: Sung Hyun Park Institution: Korea Institute of Industrial Technology Address: Sustainable Technology and Wellness R&D Group, Korea Institute of Industrial Technology, 102 Jejudaehak-ro, Jeju-si, Jeju-do 63243, Republic of Korea Email: sungpark@kitech.re.kr ORCID: 0000-0002-0784-8026 Associate or Co-investigator Contact Information Name: Xia Ouyang Institution: University of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: xouyang@umn.edu ORCID: 0000-0002-2044-7817 Associate or Co-investigator Contact Information Name: Song Ih Ahn Institution: University of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: sahn@umn.edu 3. Date of data collection 20180901 - 20211015 4. Geographic location of data collection (where was data collected?): University of Minnesota Korea Institute of Industrial Technology 5. Information about funding sources that supported the collection of the data: National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health, Award number: 4DP2EB020537 The Boeing Company The State of Minnesota MnDRIVE National Science Foundation through the National Nano Coordinated Infrastructure Network, Award Number: ECCS-2025124 -------------------------- SHARING/ACCESS INFORMATION -------------------------- 1. Licenses/restrictions placed on the data: Attribution-NonCommercial 3.0 United States 2. Links to publications that cite or use the data: Ruitao Su, Sung Hyun Park, Xia Ouyang, Song Ih Ahn, Michael C. McAlpine, 3D Printed Flexible Organic Light-Emitting Diode Displays, Science Advances 8, eabl8798 (2022). 3. Links to other publicly accessible locations of the data: NA 4. Links/relationships to ancillary data sets: NA 5. Was data derived from another source? No 6. Recommended citation for the data: Su, Ruitao; Park, Sung H.; Ouyang, Xia; Ahn, Song I.; McAlpine, Michael C. (2021). Supporting data for "3D Printed Flexible Organic Light-Emitting Diode Displays". Retrieved from the Data Repository for the University of Minnesota. --------------------- DATA & FILE OVERVIEW --------------------- 1. File List A. Filename: Fig. 1.zip Short description: Raw data for Figure 1D, including electroluminescent (EL) spectrum of 3D printed OLED. B. Filename: Fig. 2.zip Short description: Raw data for Figure 2B, 2C, 2E and 2F, including surface profiles of MDMO-PPV layers, mean thicknesses of MDMO-PPV layers, I-V curves of OLEDs, and irradiance during the lifetime measurement of OLEDs. C. Filename: Fig. 3.zip Short description: Raw data for Figure 3C, 3F, 3G and 3H, including compression force series during EGaIn reconfiguration, height-area before and after reconfiguration, and change ratio of height and area under varying compression depth. D. Filename: Fig. 4.zip Short description: Raw data for Figure 4D and 4E, including measurement of the reponse time of 3D printed OLED and summary of pixel irradiance of the 3D printed 8X8 OLED display. E. Filename: Fig. 5.zip Short description: Raw data for Figure 5B and 5C, including optical power measurement of OLEDs under varying bending curvatures and orientations. F. Filename: Fig. S2.zip Short description: Raw data for Figure S2B, including the measurement of irradiance under varying operation voltages for spray and extrusion printed OLEDs. G. Filename: Fig. S4 & Table S1.zip Short description: Raw data for Figure S4A, S4B and Table S1, including energy-dispersive X-ray spectroscopy (EDS) spectra measured at Site 1 and Site 2 and summary of the elemental weight ratio. H. Filename: Fig. S5.zip Short description: Raw data for Figure S5A-F, including compression force series during EGaIn reconfiguration under varying compression rate and compression force series during the dwell stage of the compressed EGaIn droplets. I. Filename: Fig. S8.zip Short description: Raw data for Figure S8, including measurement of the emission power variation of 3D printed OLEDs during cyclic bending tests. 2. Are there multiple versions of the dataset? yes/no No -------------------------- METHODOLOGICAL INFORMATION -------------------------- 1. Instrument- or software-specific information needed to interpret the data: - the .opj files were created with OriginPro 2016. 2.