This Readme_Su_3D Printed Microfluidics.txt file was generated on <20200725> by ------------------- GENERAL INFORMATION ------------------- 1. Title of Dataset Supporting Data for "3D Printed Self-Supporting Elastomeric Structures for Multifunctional Microfluidics" 2. Author Information Principal Investigator Contact Information Name: Michael C. McAlpine Institution: University of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: mcalpine@umn.edu ORCID: 0000-0001-7869-7598 Associate or Co-investigator Contact Information Name: Ruitao Su Institution: University of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: suxxx295@umn.edu ORCID: 0000-0002-6716-7046 Associate or Co-investigator Contact Information Name: Jiaxuan Wen Institution: University of Minnesota Address: Department of Computer and Electrical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: wen00019@umn.edu ORCID: 0000-0003-3188-637X Associate or Co-investigator Contact Information Name: Qun Su Institution: University of Minnesota Address: Department of Computer and Electrical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: suxxx291@umn.edu Associate or Co-investigator Contact Information Name: Michael S. Wiederoder Institution: U.S. Army Combat Capabilities Development Command Soldier Center Address: Natick, MA 01760, USA Email: michael.s.wiederoder.civ@mail.mil ORCID: 0000-0003-2294-7142 Associate or Co-investigator Contact Information Name: Steven J. Koester Institution: University of Minnesota Address: Department of Computer and Electrical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: koester@umn.edu ORCID: 0000-0001-6104-1218 Associate or Co-investigator Contact Information Name: Joshua R. Uzarski Institution: U.S. Army Combat Capabilities Development Command Soldier Center Address: Natick, MA 01760, USA Email: joshua.r.uzarski.civ@mail.mil ORCID: 0000-0002-5971-1670 3. Date of data collection (range) 20181001 - 20200720 4. Geographic location of data collection (where was data collected?): University of Minnesota 5. Information about funding sources that supported the collection of the data: Army Research Office, Cooperative Agreement Number: W911NF1820175 Basic research funding from the US Army Combat Capabilities Development Command Soldier Center National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health, Award number: DP2EB020537 The State of Minnesota MnDRIVE National Science Foundation through the National Nano Coordinated Infrastructure Network, Award Number: ECCS-1542202 -------------------------- SHARING/ACCESS INFORMATION -------------------------- 1. Licenses/restrictions placed on the data: Attribution-NonCommercial 3.0 United States 2. Links to publications that cite or use the data: Science Advances Article DOI: 10.1126/sciadv.abc9846 3. Links to other publicly accessible locations of the data: NA 4. Links/relationships to ancillary data sets: NA 5. Was data derived from another source? No 6. Recommended citation for the data: Su, Ruitao; Wen, Jiaxuan; Su, Qun; Wiederoder, Michael S.; Koester, Steven J.; Uzarski, Joshua R.; McAlpine, Michael C. (2020). Supporting data for "3D Printed Self-Supporting Elastomeric Structures for Multifunctional Microfluidics". Retrieved from the Data Repository for the University of Minnesota. --------------------- DATA & FILE OVERVIEW --------------------- 1. File List A. Filename: Figure 1 data.zip Short description: Raw data for Figure 1B and 1E, including angle images, burst pressure and wall thickness data. B. Filename: Figure 2 data.zip Short description: Raw data for Figure 2D, 2E and 2F, including mixing indices, simulation and confocal images, and red color gray value plots. Name convention for Figure 2D .csv files: Plane#_Herringbone Height_Reynolds Number.csv Varible names Figure 2D .csv files: cpl1x -- x-coordinate on cut-plane 1 cpl1y -- y-coordinate on cut-plane 1 c -- molar concentration of red chemical species C. Filename: Figure 3 data.zip Short description: Raw data for Figure 3E, 3F and 3G, including impedance scan, sensor calibration and real-time sensing data for Channel 1. D. Filename: Figure 4 data.zip Short description: Raw data for Figure 4C-F, including valve-pump characterization data, spherial microfluidics radius calibration data, X-Y coordinates and MATLAB script for G-code generation. E. Filename: Figure S1 data.zip Short description: Raw data for Figure S1B and S1C, including strain-stress, Young's modulus and peel-off strain data. F. Filename: Figure S3 data.zip Short description: Raw data for Figure S3A-E, including wall incline angle prection and rheology data of RTV silicone. G. Filename: Figure S7 data.zip Short description: Raw data for Figure S7B-D, including impedance scanning for Channel 2-4. 2. Are there multiple versions of the dataset? yes/no No -------------------------- METHODOLOGICAL INFORMATION -------------------------- 1. Instrument- or software-specific information needed to interpret the data: - the .opj files were created with OriginPro 2016. - dat. files were created with MATLAB 2019.