This Readme_Park and Su_ Polymer PDs.txt file was generated on <20200525> by and ------------------- GENERAL INFORMATION ------------------- 1. Title of Dataset Supporting Data for "3D Printed Polymer Photodetectors" 2. Author Information Principal Investigator Contact Information Name: Michael C. McAlpine Institution: Univerisy of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: mcalpine@umn.edu ORCID: 0000-0001-7869-7598 Associate or Co-investigator Contact Information Name: Sung Hyun Park Institution: Korea Institute of Industrial Technology Address: 89, Yangdaegiro-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si Chungcheongnam-do 31056 Republic of Korea Email: sungpark@kitech.re.kr ORCID: 0000-0002-0784-8026 Associate or Co-investigator Contact Information Name: Ruitao Su Institution: Univerisy of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: suxxx295@umn.edu ORCID: 0000-0002-6716-7046 Associate or Co-investigator Contact Information Name: Jaewoo Jeong Institution: Univerisy of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: jeong207@umn.edu Associate or Co-investigator Contact Information Name: Shuang-Zhuang Guo Institution: Sun Yat-Sen University Address: School of Materials Science and Engineering, Guangzhou, Guangdong 510275, CN Email: guoshzh3@mail.sysu.edu.cn ORCID: 0000-0002-9658-0120 Associate or Co-investigator Contact Information Name: Kaiyan Qiu Institution: Univerisy of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: kqiu@umn.edu ORCID: 0000-0002-3138-0275 Associate or Co-investigator Contact Information Name: Daeha Joung Institution: Virginia Commonwealth University Address: Department of Physics, 701 W. Grace St. 2103, Richmond, VA 23284, USA Email: joungd2@vcu.edu ORCID: 0000-0002-1016-9374 Associate or Co-investigator Contact Information Name: Fanben Meng Institution: Univerisy of Minnesota Address: Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN 55455, USA Email: fmeng@umn.edu ORCID: 0000-0002-3309-2568 3. Date of data collection (range) 20170901 - 20180501 4. Geographic location of data collection (where was data collected?): University of Minnesota 5. Information about funding sources that supported the collection of the data: National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health, Award number: 1DP2EB020537 Boeing Company The State of Minnesota MnDRIVE -------------------------- SHARING/ACCESS INFORMATION -------------------------- 1. Licenses/restrictions placed on the data: Creative Commons 2. Links to publications that cite or use the data: https://doi.org/10.1002/adma.201803980 3. Links to other publicly accessible locations of the data: NA 4. Links/relationships to ancillary data sets: NA 5. Was data derived from another source? No 6. Recommended citation for the data: Park, Sung Hyun; Su, Ruitao; Jeong, Jaewoo; Guo, Shuang-Zhuang; Qiu, Kaiyan; Joung, Daeha; Meng, Fanben; McAlpine, Michael C. (2020). Supporting data for "3D Printed Polymer Photodetectors". Retrieved from the Data Repository for the University of Minnesota. --------------------- DATA & FILE OVERVIEW --------------------- 1. File List A. Filename: Figure 1 data.zip Short description: Raw data for Figure 1 B. Filename: Figure 2 data.zip Short description: Raw data for Figure 2 C. Filename: Figure 3 data.zip Short description: Raw data for Figure 3 D. Filename: Figure 4 data.zip Short description: Raw data for Figure 4 E. Filename: Figure S1 data.zip Short description: Raw data for Figure S1 F. Filename: Figure S2 data.zip Short description: Raw data for Figure S2 G. Filename: Figure S5 data.zip Short description: Raw data for Figure S5 H. Filename: Figure S8 data.zip Short description: Raw data for Figure S8 I. Filename: Figure S11 data.zip Short description: Raw data for Figure S11 2. Are there multiple versions of the dataset? yes/no No -------------------------- METHODOLOGICAL INFORMATION -------------------------- 1. Instrument- or software-specific information needed to interpret the data: - the .opj files were created with OriginPro 2016. - the SolidWorks files were created with SoliWorks 2019 (student version).