DSpace DSpace

University of Minnesota Digital Conservancy >
University of Minnesota - Twin Cities >
Dissertations and Theses >
Master's Theses (Plan A and Professional Engineering Design Projects) >

Please use this identifier to cite or link to this item: http://hdl.handle.net/11299/140534

Title: Design and construction of a hydrostatic dynamometer for testing a hydraulic hybrid vehicle.
Authors: Kohring, Henry Julian
Keywords: Mechanical engineering
Issue Date: Jul-2012
Abstract: A hydrostatic dynamometer has been constructed to test a hydraulic hybrid passenger vehicle. Hybrid vehicles reduce their fuel consumption by capturing energy normally lost during braking and reusing it during acceleration in addition to managing the engine to enable it to run at a higher efficiency operating point. The dynamometer is designed to test a particular hybrid vehicle which stores and transmits energy hydraulically. Measurement of fuel consumption while the vehicle completes standard drive cycles is necessary to refine and validate the performance and efficiency of the vehicle. The dynamometer provides repeatable, convenient, inexpensive, safe, and flexible indoor testing for the vehicle. The dynamometer connects directly to the output shaft of the vehicle's transmission. It is mounted on a bedplate installed behind the vehicle. The dynamometer's hydraulic pump loads or motors the vehicle to simulate driving. It can be controlled either manually or automatically. Automatic controls allow the dynamometer to calculate and apply the appropriate load based on vehicle speed. MATLAB and Simulink simulations aided the design of the dynamometer. A MATLAB simulation of the vehicle determined torque and speed requirements for standard drive cycles. Another MATLAB simulation calculated pressures, flow rates, and energy storage requirements on the dynamometer to size components. A Simulink simulation aided controls development. The dynamometer has demonstrated open and closed loop performance with and without load. It has demonstrated fast torque tracking. However, vehicle reliability issues have prevented drive cycle tests from being completed.
Description: University of Minnesota M.S. thesis. July 2012. Major: Mechanical engineering. Advisors:Perry Y. Li, Thomas R. Chase. 1 computer file (PDF); vii, 98 pages, appendices A-F.
URI: http://purl.umn.edu/140534
Appears in Collections:Master's Theses (Plan A and Professional Engineering Design Projects)

Files in This Item:

File Description SizeFormat
Kohring_Henry_July2012.pdf2.14 MBPDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.